![]() It is possible to mute the device after an alarm has gone off so that it wont continuously beep. This is a decision you need to make and accept the associated risks. Turning any beeping alarm off runs the risk of missing an alert. Important note: Alarms are in place for a reason. Try unplugging the unit from the wall power outlet. If after unplugging all devices connected to the UPS unit and it’s still beeping.The quickest fix for this issue is to unplug any less important devices or electronics from the main UPS unit outlets and plug them into the CyberPower Surge-only outlets. If you experience a long slow beep, Likely to many devices are drawing from the UPS device.You might want to consider upgrading your UPS. This might be an indication that your UPS unit is not keeping up with the demand from all the devices connected to it.With the UPS off now of the power outlets will work and devices connected to the UPS will shutoff also.Īn overload condition exists: Long solid beep. The UPS will automatically shutoff when battery level gets to low. If the UPS is running out of battery rapid beeping will start when battery has 25% charge remaining.UPS is running out of battery power: Rapidly beeping. To check this, unplug the unit and wait a few seconds before checking again. The best way to be sure that the UPS is receiving power is to see if its indicator light is on. Check to that the UPS device is receiving power.Alternatively the charging cable could be faulty and need replacing. Try plugging something into the wall outlet like a lamp or fan and see if it works. To test try plugging device into another outlet. Make sure the wall outlet is turned on and working correctly.UPS unit is running on battery power: Beeping twice every 15-45 seconds. Long solid beep: An overload condition exists, such as too many devices connected to an outlet.Rapidly beeping: The UPS is running out of battery power and needs to be plugged in.Beeping twice every 15-45 seconds: This is an indication that your UPS unit is running on battery power only and it needs to plugged in or waiting for power to be restored. ![]() Below are some examples of what could cause the unit to start making noise: The reason why your CyberPower UPS unit beeps might differ depending on the situation and type of equipment you have.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |